Manufacturer: Envirolyte Industries International Ltd. in Estonia
Model: Ela-10000 HD
Year of manufacture: 2011
Line consists of: Electric compartment, hydraulic compartment, two chambers (anode chamber and cathode chamber).
Technical data:
Voltage: 400 V
Circuit breaker: 1 x C32A
ELA 10000 with 1.000 ppm FAC
Automatically adjustable pH control
Salt tank: 200 liters
Ontario water softener duplex
Mini panel with the pressure switch
Salt hooper size:
100 L: Diameter 1,0 m, height: 1,3 m
250 L: Diameter 1,5 m, height: 1,4 m
500 L: Diameter 2,0 m, height: 1,6 m
Some key data according to the manufacturer:
– The “Envirolyte ela-10000HD” unit is designed to produce electrolyzed (EW) water – anolyte for use in a variety of different applications where there is a need for disinfection, sterilization and water treatment.
– The unit uses an electrolyzer (cell) to electrically activate a saline (NaCl) solution
– There are two chambers (anode chamber and cathode chamber) separated by a diaphragm, each with a positive and negative electrode
– A direct current flows through the solution so that anolyte is formed in the positive chamber after the volume of brine is treated in the negative chamber
– The strength of the solution varies according to the current flowing between the electrodes, giving different values for ORP (redox potential), pH and C.ac (active chlorine)
– Generally, these units are designed to generate 100% neutral anolyte at ~1000 ppm FAC
– The generator is calibrated to produce anolyte of consistent quality
– However, the parameters of the fluids may vary due to differences in tap water mineralization, so the recommendation is to check the pH, ORP, and active chlorine levels at each installation site accordingly.
Condition: New
Reference: PRO3809
